View FHD1105P-TR_8830968.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

FHD1105P-TR page : 1 2012/10/30 1005(t=0.25mm) type, water clear lens outer dimension 1.0 x 0.5 x 0.25mm ( l x w x h ) ? lead?free soldering compatible ? rohs compliant ? communication machine, electric household a ppliances, oa/fa, other general applications standard product reference sheet features recommended applications package product features
FHD1105P-TR page : 2 unit :mm weight :(0.29)mg tolerance : ? 0.1 sym. part name remarks qty. led die lganinp 1 resin epoxy resin 1 pcb glass fabrics 1 ? au/ni/cu 2 2012/10/30 outline dimensions recommended pad unit :mm tolerance : ? 0.1 note: outline dimensions do not include the size of cutting burr around substrate and pin(electrodes)
FHD1105P-TR page : 3 260max -40 + 85 i f 20 ma ifrm 0.64 ma/ 48 repetitive peak forward current "1ms,1/20duty" ( ta=25 ) clear algainp yellow green forward current v if 0.27 ma/ ma product overview resin color(emitting area) power dissipation p d i frm derate linearly from "25 " die material emitting color absolute maximum ratings item symbol maximum ratings units mw i frm 48 t opr reverse voltage v r 5 i f derate linearly from "25 " storage temperature t stg t sld operating temperature soldering temperature "reflow soldering" -40 +100 2012/10/30 specifications
FHD1105P-TR page : 4 units nm dominant wave l engt h above luminous intensity (i v ) values and dominant wavelength ( d) values are the setup value of the selection machine tolerance : iv?10%, d?1nm nm spectra l line ha lf wi d t h luminous intensity - ? forwar d vo l tage reverse current - - 6.3 i f = 5ma 565 1.9 mcd nm -- 572 570 note: p i f = 5ma pea k wave l engt h i f = 5ma v r = 5v electro and optical characteristics item i r i f = 5ma v v f 2.4 ( ta=25 ) i f = 5ma 9.0 575 - min. typ. max. symbol conditions i v 100 - 15 d a 12.6 2012/10/30 specifications note: i f =5ma ta=25 above luminous intensity (iv) values are the setup value of the selection machine tolerance : iv?10% i v (mcd) sorting for luminous intensity and dominant wavelength conditions leds shall be sorted out into the following ranks of luminous intensity and dominant wavelength. 6.3 min. a max. luminous intensity (iv) rank rank b9.012.6 9.0
FHD1105P-TR 2012/10/30 x direction ydirection spectral distribution condition: ta = 25 ? , i f =5ma wavelength: (nm) relative intensity spatial distribution condition: ta = 25 ? , i f =5ma relative intensity: (%) technical data 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 380 430 480 530 580 630 680 730 780 y x 0 50 100 -100 -50 0 50 100 -30 -60 -90 60 30 0 90 page : 5
FHD1105P-TR forward current vs. relative intensity condition: ta = 25 ? forward current: i f (ma) ambient temperature vs. forward voltage condition: ta = 25 ? ambient temperature: ta ( ? ) 1 10 100 1.5 2.0 2.5 85 25 60 20 0 4 0 1.5 2.0 2.5 -40 -20 0 20 40 60 80 i f = 5ma i f =10ma i f = 2ma i f =20ma 0.0 1.0 2.0 3.0 4.0 0 5 10 15 20 2012/10/30 forward voltage vs. forward current condition : ta = -40 85 ? forward voltage: v f (v) forward current: i f (ma) ambient temperature vs. relative intensity condition: i f = 5ma ambient temperature: ta ( ? ) relative intensity relative intensity 0.1 1 10 -40 -20 0 20 40 60 80 technical data forward voltage: v f (v) page : 6
FHD1105P-TR forward current vs. dominant wavelength condition: ta = 25 ? forward current: i f (ma) 1 10 100 1 10 100 550 555 560 565 570 575 580 0 5 10 15 20 0 5 10 15 20 25 30 35 40 45 50 -200 20406080 dc duty 20% duty 50% duty 10% duty 5% 2012/10/30 dominant wavelength : d(nm) ambient temperature vs. dominant wavelength condition: i f = 5ma ambient temperature: ta ( ? ) max. forward current vs. duty cycle condition: ta = 25 ? duty cycle: d (%) max. forward current vs. ambient temperature repetition frequency: f ? 50hz ambient temperature: ta ( ? ) maximum forward current : i frm max. (ma) dominant wavelength : d(nm) maximum forward current : i frm max. (ma) 550 555 560 565 570 575 580 -40 -20 0 20 40 60 80 technical data page : 7
f1105p-tr soldering condition 1. heat stress during soldering will greatly influence the reliability of leds, however that effect will vary on heating method. also, if components of varying shape are soldered together , it is recommended to set the soldering pad temperature according to the component most vulnerable to heat stress (ex. smt led). (recommended condition: so ldering pad temp. > package temp.) 2. because led parts including the resin are not stable immediately after soldering ( when they are not at room temperature), any mechanical stress may cause damage to the product. please avoid such stress after soldering, especially stacking of the boards which may cause the boards to warp and any other types of friction with hard materials.). 3. recommended temperature profile fo r the reflow soldering is listed as the temperature of the resin surface. temperature distribution varies on heating method, pcb material, other components in the assembly, and mounting density . please do not repeat the heating proce ss in reflow process more than twice. 2012/10/30 soldering precaution (acc.to eiaj-4701/300) recommended reflow soldering condition. 40sec max. 150 180 +1.5 +5 /s 260 max. -1.5 -5 /s 90~120sec max. pre-heating (soldering 230 max. peak temperature note 1 temperature profile for the re flow soldering is listed as the te mperature of resin surface. this represents the maximum temperature ratings for so ldering. lowering the heating temperature and decreasing heating time is very eff ective in ensuring higher reliability. note 2 the reflow soldering proce ss should be done up to twice(2 ti mes max). when second process is performed, interval between first and second process sh ould be as short as possible to prevent absorption of moisture to resin of led. the s econd soldering process sh ould not be done until leds have returned to room temperature (by nature-cooling) after first soldering process. page : a-1
f1105p-tr soldering condition 4. when using adhesive material for tentative fixa tives, thermosetting resin or ultraviolet radiation(uv) setting resin with heat shall be recommended. the curing conditio n, temperature:150 ? max./time:120sec.max. 5. manual soldering, dipping ( through the wa ve ) soldering cannot be used for this product. 6. isopropyl alcohol is recommended fo r cleaning. some chemicals, incl uding freon substitute detergent could corrode or affect the optical characteristics of the lens or the casing surface. please review the reference chart below for cleaning. cleaning with ultrasonic shall not be recommended. 2012/10/30 chemical ?? isopropyl alcohol ethyl alcohol pure water trichloroethylene chlorothene acetone thinner page : a-2
f1105p-tr 2012/10/30 handling precaution other precautions 1. stanley led lamps have semiconductor characteristic s and are designed to ensure high reliability. however, the performance may vary depending on usage conditions. 2. absolute maximum ratings are set to prevent led la mps from failing due to excess stress( temperature, current, voltage, etc.). usage conditions must no t exceed the ratings for a moment, nor do reach one item of absolute maximum rating s simultaneously. 3. in order to ensure high reliability from led lamps, variable factors that arise in actual usage conditions should be taken it to account for designing. ( derating of typ., max forward voltage, etc.) 4. please insert straight protective resistors into th e circuit in order to stabilize led operation and to prevent the device from igniting due to excess current. 5. please avoid using the products with materials an d products that contain su lfur and chorine element which will decrease the reliability of led. please keep led in desiccator to protect them from corrosive gas regardless of whether mounting is finished or no t. also please make sure there is no gas occurs around or gas inflows from outside when using led. 6. please check the actual performance in the assemb ly because the specification sheets are described for single led. 7. please refrain from looking directly at the light source of led at high output, as it may harm your vision. 8. the products are designed to operate without fa ilure in recommended usag e conditions. however, please take the necessary precautions to prevent fi re, injury, and other damages should any malfunction or failure arise 9. the products are manufactured to be used for ordinary electronic eq uipment. please contact our sales staff beforehand when exceptional quality and reliability are required, and the failure or malfunction of the products might directly jeopardize life or heal th ( such as for airplanes, aerospace, transport equipment, medical applications, nuclea r reactor control systems and so on). 10. the formal specification sheets shall be valid only by exchange of documents signed by both parties. page : a-3
f1105p-tr packaging specifications this product is baked (moisture removal) before packag ing, and is shipped in moisture-proof packaging (as shown below) to minimize moisture absorption during tr ansportation and storage. however, with regard to storing the products, stanley r ecommends the use of dry-box unde r the following conditions is recommended. moisture-proof bag as th e packaging is made of anti-static material but packaging box is not. the package should not be opened un til immediately prior to its use, and please keep the time frame between package opening and soldering which is maximum 72h. if the device needs to be soldered twice, both soldering must be completed within the 72h. if any components should remain after their use, please seal the package and store them under the conditions described in the recommended stor age condition . this product must be required to pe rform baking process (mois ture removal) for at le ast 23h,not exceed for 48h, at 60+ 5 degrees celsius if follo wing conditions apply. 1. in the case of silica gel (blue) which indicates th e moisture level within the pa ckage, changes or loses its blue color. 2. in the case of time is passed for 72h after the package is opened once. baking process should be performed after led having been taken out of the package. baking may be performed in the tape-reel form , however if it is performed with the reel stacked over one another, it may cause deformation of the reels and ta ping materials and later obstruct mounting. please handle only once it has returned to room temperature. provided that, baking process shall be 2 times max. avoid storage in corroding and dusty environment. time elapsed after package opening. products warrantyperiod in the case of the package unopened , 6 months under recommended storage condition . please avoid rapid transition from low temp. condition to hi gh temp. condition. 2012/10/30 recommended storage condition. temperature +5 30 ? humidity under 70% page : a-4
f1105p-tr packaging specification moisture-proof packaging specification 2012/10/30 fastener for re-storage after opening bag. customer's opening position. product label desiccant with indicator for moisture level is enclosed. a page : a-5 heat sealing position (after product being put in)
f1105p-tr packing box (rohs ? elv compliant) 2012/10/30 the above measure is all the reference value. box for shipment is selected out of the abov e table, according to the shipping quantity. packaging specifications b type a material / box cardoard c5bf type b,c material / box cardoard k5af partition cardoard k5bf box type outline dimension l w h (mm) capacity of the box type a 280 265 45 3 reel type b 310 235 265 15 reel type c 440 310 265 30 reel page : a-6
f1105p-tr label specification ( acc.to jis-x0503(code-39) ) product label a. parts number b. bar-code for parts number c. parts code (in-house identifica tion code for each parts number) d. packed parts quantity e. bar-code for packed parts quantity f. lot number & rank (refer to lot number notati onal system for details ) g. bar-code for lot number & rank opto device label a. customer name b. parts type c. parts code d. parts number e. packed parts quantity f. carton number g. shipping date h. bar-code for in-house identification number bar-code font : acc.to code-39(jix0503) packaging specifications b a page : a-7 2012/10/30
f1105p-tr taping and reel specifications (acc.to jis-c0806-03) appearance 2012/10/30 items specifications remarks leader area cover-tape cover-tape shall be longer than 320mm without carrier-tape the end of cover-tape shall be held with adhesive tape. carrier-tape empty pocket shall be more than 20 pieces. please refer to the above figure for taping & reel orientation . trailer area empty pocket shall be more than 15 pieces. the end of taping shall be inserted into a slit of the hub. page : a-8
f1105p-tr taping and reel specifications (acc.to jis-c0806-03) 2012/10/30 10 000parts/reel minimum qty. per reel might be 500 parts when ge tting less than 10,000 parts. in such case, parts of 500-unit-qty. shall be packed in a reel an d the qty. shall be identified on the label cover-tape adhesive strength shall be 0.1 1.0n ( an angle between carrier-tape and cover-tape shall be170 deg. ) both tapes shall be so sealed that the contained parts will not come out from the tape when it is bent at a radius of 15mm. reversed-orientation, up-side down placing, side pl acing and out of spec. parts mix shall not be held. max qty. of empty pocket per reel shall be defined as follows. qty./reel max. qty. of empty pocket remark 1,000 1 - 2,000 2 no continuance 3,000 3 no continuance 4,000 4 no continuance 5,000 5 no continuance 6,000 6 no continuance 7,000 7 no continuance 8,000 8 no continuance 9,000 9 no continuance 10,000 10 no continuance qty. per reel mechanical strength others page : a-9
f1105p-tr taping dimensions reel dimensions taping and reel specifications (acc.to jis-c0806-03) 2012/10/30 sym. part name remarks carrier-tape cover-tape conductive grade anti-static grade anti-static grade carrier-reel unit :mm hole hole page : a-10
f1105p-tr lot number notational system 2012/10/30 ? ?? -1digit production location (mark identify alphabet) -1digit production year (last digit of produc tion year shall be indicate as 2009 9,2010 0,2011 1, ??? ) -2digit production month (jan. to sep. ,shall be indicated as 01,02,03, ????? ) -2digit production date -3digit serial number -2digit tape and reel following number -2digit luminous intensity rank. (if luminous intensity rank is 1 digit, "-" shall be dashed on the place for the second digit. if there is no identified rank, "- -" shall be used to indicate.) -2digit chromaticity rank (if chromaticity rank is 1 digit, "-" shall be dashed on the place for the second digit. if there is no identified rank, "- -" shall be used to indicate.) -1digit option rank (stanley normally print "-" to indicate.) page : a-11
f1105p-tr correspondence to rohs ? elv instruction 2012/10/30 this product is in compliance with rohs ? elv. prohibition substance and it's criteria value of rohs ? elv are as follows. ? rohs instruction ?? refer to following (1) (6). ? elv instruction ???. refer to following (1) (4). substance group name criteria value (1) lead and its compounds 1,000ppm max (2) cadmium and its compounds 100ppm max (3) mercury and its compounds 1,000ppm max (4) hexavalent chromium 1,000ppm max (5) pbb 1,000ppm max (6) pbde 1,000ppm max page : a-12
f1105p-tr reliability testing result 2012/10/30 1. reliability testing result test item reference standard test condition duration failure room temperature operating life eiaj ed- 4701/100(101) ta = 25 , i f = 20ma 1,000 h 0/20 high temperature operating life eiaj ed- 4701/100(101) ta = 85 , i f = 8ma 1,000 h 0/20 low temperature operating life eiaj ed- 4701/100(101) ta = -40 , i f = 20ma 1,000 h 0/20 wet high temperature operating life eiaj ed- 4701/100(102) ta = 60 , rh = 905%,i f =14.6ma 1,000 h 0/20 thermal shock eiaj ed- 4701/100(105) ta = -40 ~100 (each 15min) 1,000 cycles 0/20 resistance to reflow soldering eiaj ed- 4701/300(301) moisture soak 30 70% 96h preheating 150 180 120sec max solderin g 260 peak 2times 0/20 electrostatic discharge(esd) eiaj ed- 4701/300(304) c=100pf r2=1.5k 1000v once each polarity 0/20 item symbol condition failure criteria luminous intensity iv i f a testing min. value standard min. value 0.5 forward voltage v f i f a testing max. value R standard max. value 1.2 cosmetic appearance - - notable, discoloration, deformation and cracking 2. failure criteria page : a-13
f1105p-tr special notice to customers using the products and technical information sh own in this data sheet 1) the technical information shown in the data sheets are limited to the typical characteristics and circuit examples of the referenced products . it does not constitute the warra nting of industrial property nor the granting of any license. 2) for the purpose of product improvement, the specifi cations, characteristics and technical data described in the data sheets are subject to change without prior no tice. therefore it is recommended that the most updated specifications be used in your design. 3) when using the products described in the data sheets, please adhere to the maximum ratings for operating voltage, heat dissipation characteri stics, and other precautions for use. we are not responsible for any damage which may occur if th ese specifications are exceeded. 4) the products that have been described to this catalo g are manufactured so that they will be used for the electrical instrument of the benchmark (oa equipmen t, telecommunications equi pment, av machine, home appliance and measuring instrument). the application of aircrafts, space borne applicatio n, transportation equipmen t, medical equipment and nuclear power control equipment, etc. needs a high reliability and safety, and the breakdown and the wrong operation might influence the life or the human body. pl ease consult us beforehand if you plan to use our product for the usages of aircrafts, space borne appl ication, transportation equipment, medical equipment and nuclear power control equipmen t, etc. except oa equipment, telecommunications equipment, av machine, home appliance and measuring instrument. 5) in order to export the products or technologies described in this data sheet which are under the ?foreign exchange and foreign trade control law,? it is neces sary to first obtain an export permit from the japanese government. 6) no part of this data sheet may be reprinted or reproduced without prior written permission from stanley electric co., ltd. 7) the most updated edition of this data sheet can be obtained from the address below: http://www.stanley-components.com 2012/10/30 page : a-14

▲Up To Search▲

Price & Availability of FHD1105P-TR

	To Download FHD1105P-TR Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .